产品中心
Products
产品详情

Easytherm 30 is the largest Easytherm induction heater. Suitable for heating bearings with max. mass of 300 kg and max. OD ø 660mm. Our standard version is a workbench model. The ET30 is designed for very intensive use in industrial production or service/repair environments. In addition to Temperature Mode, heating in Time Mode is available on our larger Easytherm induction heaters (ET3.5, ET15, ET30).

The following yokes are included with Easytherm 30:80 x 80. Additional yoke sizes are listed in our Datasheet. A magnetic temperature sensor with a length of 1000 mm is included as well.

The ET30 can also be supplied on a trolley (optional), so the device can be used on different locations in the workplace. The trolley is designed to store the different yokes.

Easytherm 30 是Easytherm 系列最大的感应加热器。适用于加热最大质量 300 公斤和最大外径 ø660 毫米的轴承。标准版本为工作台模型。Easytherm 30专为工业生产或服务/维修环境中的高强度使用而设计。

Easytherm 30 包含以下磁轭:80 x 80,还包括一个长度为 1000 mm 的磁性温度传感器。

ET30 也可以放在手推车(可选)上,在车间的不同位置移动使用,手推车上可以存放不同的轭铁。


SPECIFICATIONS参数

Voltage电压400 / 460 V
Frequency频率50 / 60 Hz
Max. current最大电流32 A
Weight excl. yoke(s)设备重量(不含轭铁)119 kg
Footprint范围807 x 307 mm
Max. Temperature最高温度240 °C / 464 °F